Heated floor installation in Mississauga takes the chill off tile and turns a cold bathroom or basement into a room you want to stand in. We set electric radiant heating under new tile and some vinyl floors, wired to a thermostat, and fit it as part of the flooring job. Book a free in-home measure and get a written quote first.
We come to you, measure, and price it before you commit.
A steady Mississauga crew, not day labour.
We flag and prep moisture or level issues so the floor sits right.
Tear-out and haul-away available on any job.
We shift the larger pieces so you do not have to.
We stand behind our installation with a 5-year workmanship guarantee, confirmed on your quote.
Tell us the rooms and the floor you have in mind.
We measure, check the subfloor, and give you a written estimate.
We book a date that suits you and prep the subfloor.
We fit the floor, finish the trim, and leave it ready to use.
In-floor heating makes the most sense in the rooms where a cold floor is most noticeable underfoot.
Heated systems go under tile most often, and under some vinyl floors rated for it. They are not suited to every surface, so we confirm the floor and the product at the measure.
Electric radiant heat is simple and reliable, with nothing to service once it is in.
A thin heating layer – either a radiant mat or loose cable – is set on the subfloor across the area you want warmed. The floor goes down over top, so the heat sits directly beneath your tile or vinyl. The system wires to a thermostat on the wall, which you set to a temperature or a schedule. The floor warms from below and spreads the heat evenly across the surface, with no vents, no fans, and no noise.
Because the heating layer is buried under the finished floor, it has to go in during installation. Adding it later means lifting the floor, so this is a decision to make before we set the tile.
Heated floors are not a standalone job – they are a layer inside a flooring installation, which is why we fit them together with the floor going over top.
Tell us at the measure that you want a warm floor, and we plan the heating into the tile flooring installation or vinyl plank installation from the start. We lay the mat or cable, set the floor over it, and coordinate the thermostat. If you are warming a bathroom or basement as part of a larger renovation, we can also tie it in alongside a hardwood floor installation elsewhere in the home so the whole project is handled together.
The point of a heated floor is comfort, and it delivers it where you feel it most.
Tile and stone are hard, dense surfaces that stay cold on their own. Radiant heat turns that same tile into a warm floor that is pleasant to walk on barefoot, which is a real difference in a bathroom or a basement. The warmth is even across the whole floor rather than concentrated at a vent, and it is quiet and out of sight. Many homeowners run it on a timer so the floor is warm when they wake up and cools off during the day.
We do not quote energy savings or make efficiency claims – a heated floor is about comfort in the room, and how much you run it is up to you and your thermostat.
We install heated floors across Mississauga, including Port Credit, Streetsville, Meadowvale, Erin Mills, Cooksville, Churchill Meadows, Clarkson, and the Hurontario and Square One area. If your neighbourhood is not listed, mention it when you request an estimate.
Electric radiant heating is wired by a licensed electrician and permitted through the Electrical Safety Authority, so the system is inspected and on record.
Not easily. The heating layer sits under the finished floor, so it goes in when the floor is installed. If your floor is staying, adding heat means lifting it first. The best time is during a new floor or a renovation.
It works best under tile and stone, which hold and spread the heat well. Some vinyl floors are rated for radiant heat too. It is not suited to every surface – we confirm the floor and the product at the measure.
The system wires to a wall thermostat. You set a temperature or a schedule, and the floor warms from below. Many homeowners run it on a timer so the room is warm at the times they use it.
No. Electric radiant heat has no fans or moving parts, so it is silent and there is nothing to service once it is installed under the floor. Ready for a warm floor? Book a free in-home measure and written quote today.
Tile installation in Mississauga for bathrooms, kitchens, and entryways. Porcelain, ceramic, and stone set on a proper subfloor. Free in-home measure.
Learn more
Vinyl plank flooring installation in Mississauga for homes. Waterproof luxury vinyl plank (LVP and LVT) fitted by local installers. Get a free estimate.
Learn more
Hardwood floor installation in Mississauga for homeowners. Solid oak, maple, hickory, and walnut, nailed or stapled down. Get a free measure and quote.
Learn more