Hardwood floor refinishing in Mississauga brings tired, scratched, or dated floors back to life without the cost of replacement. Our local crews sand your floor down, apply the stain and finish you choose, and leave you with a fresh, even surface. Book a free in-home assessment and get a written quote before we start.
We come to you, measure, and price it before you commit.
A steady Mississauga crew, not day labour.
We flag and prep moisture or level issues so the floor sits right.
Tear-out and haul-away available on any job.
We shift the larger pieces so you do not have to.
We stand behind our installation with a 5-year workmanship guarantee, confirmed on your quote.
Tell us the rooms and the floor you have in mind.
We measure, check the subfloor, and give you a written estimate.
We book a date that suits you and prep the subfloor.
We fit the floor, finish the trim, and leave it ready to use.
A refinished floor is only as good as the prep beneath it. Here is how a full refinish runs.
Proper sanding and clean coats are what separate a floor that looks new from one that shows every swirl and lap mark.
Not every floor needs a full sand. Matching the job to the floor saves you time and money.
A buff-and-recoat every few years can delay a full refinish for a long time. We will tell you honestly which one your floor needs at the assessment.
Refinishing is your chance to reset the colour and sheen of your floors.
Stain runs from light naturals through warm mid-tones to deep, dark browns and near-black. We test your chosen stain on your actual floor first, since the same colour reads differently on oak than on maple.
For the finish coat, you have two main choices:
Sheen ranges from matte through satin and semi-gloss to full gloss. Matte and satin hide everyday scuffs and dust better, which is why most homeowners choose them.
Refinishing is the right moment to fix the wood, not just the finish. Before we sand, we address damaged boards, deep gouges, loose planks, and squeaks. We can replace individual boards and blend them into the surrounding floor so the repair disappears under the new finish. Catching these first means you refinish over a sound floor.
Sometimes, but not always. Engineered hardwood has a thin real-wood veneer over a stable core, so it can only be sanded if that veneer is thick enough – usually once, if at all. A thin-veneer floor risks sanding through to the core. We assess the wear layer before recommending a sand, and a buff-and-recoat is often the safer route. If you are weighing a new engineered floor instead, see our engineered hardwood installation page.
We refinish hardwood floors across Mississauga, including Port Credit, Streetsville, Meadowvale, Erin Mills, Cooksville, Lorne Park, Clarkson, Mineola, and the City Centre and Square One area. Not sure if you are in range? Ask us. If your floors are past saving, we also handle hardwood floor installation.
Water-based finishes dry fastest, often walkable within hours. Oil-based finishes take longer. Either way, the floor needs several days to cure fully before rugs and heavy furniture go back.
You can usually stay, but expect noise, odour, and rooms that are off-limits while they dry. Water-based finishes have less odour if that is a concern. We will map out which areas are usable each day.
A full refinish is typically needed every couple of decades, depending on traffic and wear. A buff-and-recoat every few years stretches the time between full refinishes.
Yes. Furniture moving is available. Let us know what needs shifting at the assessment so we can plan for it. Ready to bring your floors back? Book a free in-home assessment and written quote today.
Hardwood floor installation in Mississauga for homeowners. Solid oak, maple, hickory, and walnut, nailed or stapled down. Get a free measure and quote.
Learn more
Hardwood floor repair in Mississauga – board replacement, squeak fixes, water and pet damage, gaps, and cupping. Colour-matched and blended. Free quote.
Learn more
Engineered hardwood flooring in Mississauga installed by local pros. Floating, glue-down, and nail-down over concrete or wood. Free in-home measure and quote.
Learn more